|
|
 |
|
|
|
|
|
|
|
Safety Cover, Chrome Red - 73500
Safety Cover, Bright Red - 73202
Safety Cover, Chrome Silver - 73502
Safety Cover, Chrome Blue - 73501
Safety Cover, Black - 73203
|
 | Rugged spring-loaded design provides protection against accidental
actuation.
| | | | Perfect for a variety of industry applications, from racing to
agriculture.
| | | | Materials: Base faceplate is black steel; cover is red urea plastic.
| | | | Mounting hole accepts all standard ProWeld toggles with 15/32"
mounting stems.
|
|
|
|
Toggle Switch and Red Safety Cover Kit - 73210
|
| | All-in-one kit includes 73185 toggle and 73200 safety switch ready
to be installed
| | | | On-Off Switch with screw terminals
| | | | Red toggle safety cover that; when open allows for switch to be
turned to the On position, and when closed it turns switch to Off position and prevents the switch from accidentally being
turned On.
|
|
|
|
Clear Full Toggle Boot - 73101
Black Toogle Boot - 73100DL
Black Toogle Boot,
UL Listed - 7900001
|
| | Tough rubber silicon covers protect switches from moisture, dust
and dirt.
| | | | Built-in hex nut base screws on to all ProWeld toggle switches.
| | | | Boots are rated for -40° C to 180° C (-40° F to 356°
F).
| | | | UL listed
|
| | UL listed.
| | | | Tough rubber silicon covers protect switches from moisture, dust
and dirt.
| | | | Built-in hex nut base screws on to all ProWeld toggle switches.
|
|
|
|
Incandescent Indicator Lights
|
| | Indicator lamps with wire leads for easy installation.
| | | Mounts into 1/2" hole at 12 volts DC.
| | | | Rated to 3 amps.
| | | | Casing for the red lamps is translucent red. The others are black |
|
|
|
|
| | Perfect for a variety of DC applications.
| | | | LEDs rated for 15mA 12 volts DC.
| | | | Temperature rating up to 85° C.
| | | | Estimated 100,000 hours life expectancy.
| | | | 20 AWG lead wires.
| | | | Manufactured with chrome housing and a nylon base.
| | | | Recommended mounting hole" 7/16" diameter.
|
|
|
|
|
| | 6" wire leads with push-in grommet
| | | | Rated to 12V DC with a 5/16" mounting hole
|
|
|
|
Round Hole Rocker Switch Mounting Harness - 7400750
Toggle Switch Mounting Harness - 7400700
|
| | Easily snaps into place on any .187", 3 terminal, S.P.S.T.
round rocker switch.
| | | | Base is prewired with 7", red, 16 AWG wire leads
|
| | Easily snaps into place on any .250", 6 terminal, D.P.D.T.
toggle switch.
| | | | Base is prewired with 7", red, 16 AWG wire leads
|
|
|
|
Heavy-duty Toggles - Screw Terminal
Heavy-duty Toggles - Solder Terminal
Heavy-duty Toggles - Flat Terminal
|
| | Typical applications: industrial controls, marine panels, trucks,
buses and automotive.
| | | | Materials: brass terminals, frame and support are steel with zinc
chromate, case is black phenolic plasic (flammability rating: UL 94 flame class 94V-1) and all other external parts are brass/bright
nickel.
| | | | Recommended mounting hole: 1/2" diameter.
| | | | Single Pole Rated: 10A/277V AC; 20A/125V AC; 21A/14V DC; 3/4 HP
125-250V AC.
| | | | Double Pole Rated: 10A/277V AC; 20A/125V AC; 21A/14V DC; 1-1/2
HP 125-250V AC
| | | | ( ) indicates momentary action
|
|
|
|
Heavy-duty O Ring Toggles - Screw Terminal
Heavy-duty O Ring Toggles - Flat Terminal
|
| | Typical applications: industrial controls, marine panels, trucks,
buses and automotive.
| | | | Materials: brass terminals, frame and support are steel with zinc
chromate, case is black phenolic plasic (flammability rating: UL 94 flame class 94V-1) and all other external parts are brass/bright
nickel.
| | | | Neoprene seal signifies complete protection against harsh environments.
| | | | Moisture and dust resistant.
| | | | Single Pole Rated: 10A/277V AC; 20A/125V AC; 21A/14V DC; 3/4 HP
125-250V AC.
| | | | Double Pole Rated: 10A/277V AC; 20A/125V AC; 21A/14V DC; 1-1/2
HP 125-250V AC.
| | | | ( ) Indicates momentary action.
|
|
|
|
3-pole Toggles - Solder Terminal
3-pole Toggles - Screw Terminal
3-pole Toggles - Flat Terminal
|
| | Typical applications: surface transportation, generators, motor
controls, food service, general industrial automation
| | | | Materials: brass terminals, frame and support are steel with zinc
chromate, case is black phenolic (flammability rating: UL 94, flame class 94V-1) and all other external parts are brass/bright
nickel
| | | | Dielectric strength (min): 1000v RMS
| | | | Insulation resistance (min): 100 megohms
| | | | Includes 2 hex nuts and 1 spring washer
| | | | Recommended mounting hole: 1/2" dia.
| | | | 10A / 277V AC, 16A/125V AC
| | | | ( ) Indicates momentary action.
|
|
|
|
4-pole Toggles - Flat Terminal
4-pole Toggles - Solder Terminal
4-pole Toggles - Screw Terminal
|
| | Typical applications: surface transportation, generators, motor
controls, food service, general industrial automation
| | | | Materials: brass terminals, frame and support are steel with zinc
chromate, case is black phenolic (flammability rating: UL 94, flame class 94V-1) and all other external parts are brass/bright
nickel
| | | | Dielectric strength (min): 1000v RMS
| | | | Insulation resistance (min): 100 megohms
| | | | Includes 2 hex nuts and 1 spring washer
| | | | Recommended mounting hole: 1/2" dia.
| | | | 10A/277V AC, 16A/125V AC
| | | | ( ) Indicates momentary action.
|
|
|
|
Illuminated Wedge Toggles
|
| | Three 1/4" male blade terminals.
| | | | Polycarbonate housing, colored wedge handle 1-1/16" and LED
indicator light.
| | | | Rated at 20A/12V DC.
| | | | Recommended mounting hole: 1/2" diameter.
|
|
|
|
LED Tipped Toggles
|
| | Black actuator tipped with LED.
| | | | Minimum draw requirement for LEDs is 20mA at 12V DC.
| | | | Rated 30A/12V DC.Perfect for automotive use.
| | | | Recommended mounting hole: 1/2" diameter.
|
|
|
|
Illuminated Paddle Toggles
|
| | Black nylon housing (UL Flame: 94-2) with backup nut design.
| | | | Recommended mounting hole: SP 15M/DP 18mm.
| | | | Rated 3A/250V AC; 6A/125V AC. 5 mm panel thickness.
|
|
|
|
Illuminated LED Tip Toggle Switch - Long
Illuminated LED Tip Toggle Switch
|
| | These NEW LED tip toggle switches feature an extended chrome handle
with .250" terminals.
| | | | Rated for 12V DC at 20A applications.
| | | | SPST, On-Off.
| | | | .500" mounting hole.
|
|
|
|
Illuminated, Dependent
Illuminated, Round Hole Rockers
Non-illuminated Bi-color Round Rocker
White Round Rockers
Illuminated AC Round Rockers
Non-illuminated w/Legends Round Rockers
Non-illuminated Surf N Turf Rocker
Illuminated Surf N Turf Rockers
Illum Rocker Switches
LED Illuminated Single Pole Euro-style Rocker Switches
Single & Double Pole Euro-style Rocker Switches
|
| | Dust resistant black nylon housing (UL flame: 94V-2) with back-up
nut design
| | | | Available in both LED and incandescent illumination
| | | | Recommended mounting hole: .79" diameter
| | | | Specifications: 16A/125V AC, 10A/250V AC
| | | | 6mm max panel thickness
|
| | Heavy-duty construction
| | | | Moisture and dust resistant
| | | | Recommended uses: Commerical appliances, industrial controls,
van conversions, marine panels, automotive, motor controls, trucks and buses
| | | | Materials: terminals are brass, frame and rocker are black glass-filled
nylon, case is black (flammability rating: UL 94 flame class 94V-2), gasket is molded elastomer
| | | | Recommended mounting hole: .830" (+/- .015) x 1.450"
(+/- .005)
| | | | Specs: 21amps at 14V DC
| | | | Note: because panel material will affect mounting performance,
all mounting panel cutouts should be tested for suitability prior to manufacture
|
| | This AC rated rocker is also suitable for low voltage DC applications
| | | | Snap-in panel design for ease of installation into .79" mounting
hole
| | | | Specifications: 16A / 125V AC, 10A / 250V AC
| | | | 3 mm panel thickness
|
| | Snap in mounting design for ease of installation into .79"
diameter mounting hole
| | | | Round rocker switches are qualified with several international
approvals
| | | | These AC rated switches are also suitable for low voltage DC applications
| | | | Materials: .187" silver plated brass terminals with a nylon
frame (flammability rating: UL 94V-2)
| | | | Non-illuminated
|
| | Aesthetically pleasing and compatible with a wide range of standard
panel cutouts
| | | | These AC rated switches are also suitable for low voltage DC applications
| | | | Round rocker switches are qualified with several international
approvals
| | | | Illumination voltage: AC=110V
| | | | Materials: .187" silver plated brass terminals with a nylon
frame (flammability rating: UL 94V-2)
| | | | Snap in mounting design for ease of installation into .79"
diameter mounting hole
| | | | Single pole: 10A/125V AC, 6A/250V AC
| | | | Double pole: 16A/125V AC, 10A/250V AC
|
| | Choose from 4 legend options
| | | | Materials: .187#34 silver-plated brass terminals with nylon frame
(flammability: UL 94V-2)
| | | | Snap-in mounting design for ease of installation in to .79#34
diameter mounting hole
|
| | Recommended uses: marine panels, trucks, buses, trailer, construction,
farm equipment and recreation equipment
| | | | Moisture and dust resistant
| | | | Oval actuator style
| | | | Designed to meet or exceed IP66 and IP67 requirements
| | | | Recommended mounting hole: .830" (+/- .015) x 1.450"
(+/- .005)
| | | | Single pole: 21A/14V DC
| | | | Double pole: 21A/14V DC
|
| | Two position rocker switches with black nylon housing.
| | | | Illuminated "On" position, with 3 tab terminals.
| | | | 1/4" male blade terminals.
| | | | Rated at 20A/12V DC.
| | | | Recommended mounting hole: 1/2" x 1"
|
| | Flowing contoured actuator provides a sleek Euro-style appearance
and visual identification for an activated circuit
| | | | These nylon 6/6 actuators and frames are designed with a drainage
system to help funnel water away from the internal switch components.
| | | | Snap-in mounting allows easy installation.
| | | | Fits standard rocker cut out .830" x 1.450".
| | | | Switches are rated up to 20 amps in 12 volt DC applications.
|
| | Flowing contoured actuator provides a sleek Euro-style appearance.
| | | | Water and dust resistant and are sealed to the IP56 NEMA.
| | | | These nylon 6/6 actuators and frames are designed with a drainage
system to help funnel water away from the internal switch components.
| | | | Snap-in mounting allows easy installation.
| | | | Fits standard rocker cut out .830" x 1.450".
| | | | Switches are rated up to 21A at 14VDC, 18A at 125VAC, 10A at 277VAC
and 3/4HP applications |
|
|
|
Battery Master Switch
Starter & Horn Switch
Starter & Horn Switch
Heavy-duty Push Button Switch
Universal Lanyard Kill Switch
4-Position Ignition Switch
Push-pull Switch
Push-pull Switch
GM self-adjusting OEM Door Switch
GM self-adjusting OEM Door Switch
180A Master Disconnecting Switch
Push Button Boot
|
| | Waterproof, single battery master switch is UL rated
| | | | Key is detachable, therefore, the switch also serves as an anti-theft
device
| | | | Max load (10 sec.): 12 volts, 1000 amps; 24 volts, 500 amps
| | | | Max continuous rating: 12 volts, 50 amps; 24 volts, 25 amps
|
| | Insulated type push-button starter and horn switch.
| | | | Moisture-proof switch supplied with a special moisture-proof and
dust-proof rubber cap.
| | | | Mounting bushing: 1-1/4" long, 5/8" diameter.
| | | | Overall length: 2-7/8", width: 7/8".
| | | | Brass washer and back-up nut, stainless steel springs.
| | | | Accommodates 1" panel.
| | | | Rated at 25A/6V DC, 15A/12V DC.
| | | | Circuit arrangement: (On) - Off
|
| | Insulated type push-button starter and horn switch.
| | | | Moisture-proof switch supplied with a special moisture-proof and
dust-proof rubber cap.
| | | | This model is provided with chrome-plated brass face nut and back-up
nut.
| | | | Mounting bushing: 1-1/4"long, 5/8" diameter.
| | | | Overall length: 2-7/8", width: 7/8".
| | | | Brass washer and back-up nut, stainless steel springs.
| | | | Accommodates 1" panel.
| | | | Rated at 25A/6V DC, 15A/12V DC |
| | (ON) - OFF Heavy-duty push-button switch.
| | | | 5/8" - 32 UNS mounting bushing for panels up to 1/2"
thick.
| | | | Die cast with silver/copper contacts for long life.
| | | | Push for momentary-on action.
| | | | Rubber dust and moisture-resistant boot nut included.
| | | | Two screw terminals.
| | | | Rated: 50A at 12V DC.
| | | | ( ) Indicates momentary action |
| | Marine emergency cut-off, safety switch that attaches to your
life vest while operating a boat or personal watercraft.
| | | | Switch includes a lanyard Coil approximately 15" coiled/48"
when stretched and weatherproof housing with brass .250" terminals
| | | | Dual circuitry allows kill switch to be wired for either ignition
kill or magneto kill depending on your application.
| | | | Mounting hole is 5/8" diameter and can be mounted to a panel
up to 3/8" thickness.
| | | | For your safety, switch should be tested before each use.
|
| | Starter switch, manufactured from plated steel .
| | | | This switch offers these four positions: Accessory/Off/On/Start
| | | | Recommended mounting hole: .750" diameter.
| | | | Two keys are included.
|
| | SPST ON-OFF Heavy-duty, 2 position push-pull switch.
| | | | Made of brass and chrome.
| | | | Mounting stem: 1-1/4" long, 3/8" diameter. Overall length:
3-1/8", width 7/8".
| | | | Rated: 15A at 12V, 25A at 6V.
| | | | Accomodates 1" panel with stainless steel springs.
|
| | Extra heavy-duty, 2 position push-pull switch with chrome-plated
metal knob.
| | | | Poles: SPST. Circuit Arrangement: ON-OFF.
| | | | Mounting stem 5/8" long, 15/32" diameter.
| | | | Rated at 75A/6 or 28V DC.
|
| | 1/2" grounding self-adjusting switch.
| | | | Will work on GM van doors. Use in Ford cars as a ground switch
going directly to alarm or, if (+) dome light activation is needed, use this switch with a relay.
|
| | Self-adjusting grounding door switch.
| | | | Requires a 5/16" hole size.
|
| | Battery Master Disconnect
| | | | Lever operated - 6-36 volt, 180 amps.
| | | | Continuous capacity 1,000 amps in rush S.P.S.T. (On-Off), two
stud terminals.
| | | | For battery circuit only.
| | | | Does not disconnect alternator or generator field circuit.
| | | | Mounting stem 3/4" diameter, 25/32" long with two hex
nuts and lock washer.
| | | | 10,000 Cycles minimum
|
| | Tough EPDM rubber covers protect switches from moisture, dust
& dirt.
| | | | Built-in hex nut base screws on to all ProWeld push button
switches.
| | | | Boot rated for -40° C to 110° C.
|
|
|
|
|
New - Switch Panels
| | Low-profile rocker switch panel.
| | | | Switch tray is molded plastic with rubber gasket and sealed molded
into the plastic.
| | | | Each of the four, SPST, On-Off rocker switches is rated for 12V
DC at 15A.
| | | | Can be mounted either verically or horizontally.
| | | | Switch panel dimensions: 2.5"H x 4.7"W x 1"D
|
New - Switch Panels
| | Economical rocker switch panel.
| | | | Each switch is protected by ATC fuse.
| | | | Each of the six, SPST, On-Off LED rocker switches is rated for
12 V DC.
| | | | Maximum load amp is 50.
| | | | Ideal for inside cabin use.
| | | | Switch panel dimensions: 4.25"H x 4.25"W x 1"D
|
6-Way Toggle Switch Panel
| | This switch panel provides a spray-proof and essential pleasing
way to control up to 6 different mechanisms.
| | | | A toggle boot covers the SPST, On-Off switch that is rated at
12V DC at 20A.
| | | | Each switch is prewired with a fuse and fuse holder for added
protection.
| | | | Switch panel dimensions: 3.75"H x 4.25"W x 2.9"D
| | | | Rated to IP56
|
Toggle Safety Panel
| | Protects your toggle switches from accidental actuation.
| | | | Allows for up to 3 switches with up to 1" bat handles to
be mounted.
| | | | Mounts easily with two #4 screw holes
| | | | Dimensions: 4 13/16"L x 2"H x 2"D
|
|
|
|
|
Push-Button Engine Start Switches
| | Start your engine effortlessly with a push of a button.
| | | | The large actuator allows for easy visibility.
| | | | Frame is manufactured from nylon 6/6 with an ABS chrome bezel.
| | | | Switch mounts easily into a .875" hole, up to a .354"
panel thickness.
| | | | Wire hook-up is a cinch with M4 screw terminals.
| | | | Rated for 12V DC @ 50A.
|
|
|
| |
|
|
Pro Weld
5937 Ethan Drive
Burlington, KY 41005
859-586-4069
Proweld@myway.com
|
|
|
|
