|
|
 |
|
|
|
|
|
|
4"
Colored Cable Ties...
Cable Ties - Colored
 | Use ProWeld colored ties for wire bundle identification.
| | | | Recognized under UL File #E125869.
| | | | Meet UL94V-2 Flammability Classification.
|
|
|
|
|
8"
Colored Cable Ties...
|
|
|
|
11" Colored
Cable Ties..
|
|
|
|
14"
Colored Cable Ties..
|
|
|
|
Cable Ties - Heavy-duty
| | Provide up to 50% more tensile strength and 15% larger bundle
diameters than competitive product.
| | | | Positive-locking teeth, closely and evenly spaced on both sides
of the head provide increased strength.
| | | | Raised ridges on the cable ties bent tips are designed to provide
a secure grip while requiring minimal effort to close.
| | | | The patented, one-piece, injection-molded construction eliminates
failure due to parts working loose or breaking off.
| | | | Recognized under UL file # E125869 and meet UL94V-2 Flammability
Classification.
|
|
|
|
|
Identification ties
| | UL listed.
| | | | Fasten and identify bundles at the same time.
| | | | Durable nylon 6/6.
| | | | Matte finish on both sides readily accepts ink for clear identification.
| | | | Can be used on all ties up to 14-in and 75-lb tensile strength.
| | | | Meets UL94V-2 Flammability Classification |
|
|
|
|
Cable Ties - Releasable
| | Release feature enables user to reuse the cable tie.
| | | | The ties are made of UV-resistant 6/6 black nylon.
| | | | For use at temperatures not exceeding 85° C (185° F).
| | | | Recognized under UL file #E76766. Meets UL94-2 Flammability Classification.
|
|
|
|
|
Cable Ties - Push Mount
| | Push-mount cable ties snap quickly into a 1/4-in hole to attach
a bundle to another surface.
| | | | The mount portion is easily passed into a pre-drilled hole and
locks into place.
| | | | All ties are made with durable 6/6 nylon.
| | | | For use at temperatures not exceeding 85° C (185° F).
| | | | Recognized under UL file # E76766 (N). Meet UL94V-2 Flammability
Classification |
|
|
|
|
Bases - Adhesive
| | Bases can be attached to a clean and dry surface of metal, plastic,
glass, paper and painted surfaces.
| | | | A screw or rivet is recommended for extra holding strength against
outdoor elements.
| | | | Bases are made with durable 6/6 nylon with acrylic adhesive. Adhesive
has a higher melting point.
| | | | The counter-sunk hole for the screw or rivet will not interfere
with the cable ties.
| | | | Meets UL84V-2 Flammability Classification.
| | | | The bases can be used on all self-locking ties up to 14"
and 75 lb. tensile strength.
|
|
|
|
|
Cable Ties - Mounting Tab
| | Mounting tab cable ties have a molded-in screw hole for securing
bundles of wire on virtually any surface that has or can accept a drilled hole.
| | | | Up to a 1/4-in screw size can be used, or a comparable rivet size.
| | | | All mounting tab cable ties are made of durable 6/6 nylon.
| | | | For use at temperatures not exceeding 85° C (185° F).
| | | | Recognized under UL file #E125869(N). Meets UL94V-2 Flammability
Classification.
|
|
|
|
|
Stainless Steel Cable Ties
| | Manufactured from #304 stanless steel material
| | | | Features a self-locking ball mechanism.
| | | | 100lb tensile strength
| | | | Resistant to chemicals and radiation exposure.
| | | | Operates in temperatures up to 572° F (300°)
|
|
|
|
|
Low profile 4-way entry
| | Low profile for use where height is limited.
| | | | The counter-sunk hole insures that the screw or rivet will not
interfere with your cable tie.
| | | | Made with durable 6/6 nylon.
| | | | Can be used on all self-locking ties up to 14-in and 75 lb. tensile
strength.
| | | | For use at temperatures not exceeding 85°C (185°F).
| | | | Meets UL94V-2 flammability classification. UL recognized under
file # E76766.
|
Narrow design 2-way entry
| | Narrow and higher design for crowded surface areas.
| | | | Deep cradle design provides extra support for large bundles and
many components.
| | | | Bases made with durable 6/6 nylon.
| | | | Screw hole size: 1/4-in.
| | | | For use at temperatures not exceeding 85° C (185° F).
| | | | Meets UL94V-2 flammability classification. UL recognized under
file #E76766.
|
|
|
|
|
Grommets - Rubber
| | Protect wires from chafing against drilled holes.
| | | | Grommets are organized by groove width (select from below).
| | | | NOTE: Groove diameter is the size of hole needed to snap a grommet
into for the best fit.
| | | | Black in color.
|
Standard
Nylon Grommets
| | Eliminate wire abrasion caused by metal panel cutouts |
Grommets - Flexible
| | Protects and insulates wires and cables from chafing against sharp
chassis edges.
| | | | Serrated design is ideal for irregular shaped panel holes.
| | | | Choose from 1/8", 3/16" or 1/4" chassis thickness;
standard 100-ft rolls.
| | | | ASTM D-4066 flammability classification 94V-2.
| | | | Temperature index: 125° C.
|
|
Grommets with 1/16"
Groove
Grommets with
1/8" Groove
Grommets with 3/16"
Groove
Grommets With 1/4"
Grooves
|
|
|
Strain Relief Cord Connectors
| | Liquid tight strain relief cord connectors have a unique design
that has vibration proof protection (up to 70 psi) and an optimum seal
| | | | Std MPT Thread & flex-type internationally approved: UL #E79903,
CSA #LR50370-10, VDE #57986, SEV #100989
| | | | Std PG Thread 6/6 Nylon w/ TPE gland. UL listed under #E-51579,
CSA #LR-93876.
| | | | Dust protection and resistant to salt water, weak acids, weak
alkalis, alcohol, gasoline, oil, grease, and common solvents
| | | | Standard dome nut for strain relief only; or use a flex nut type
which includes the strain relief and helps prevent cable kinking
| | | | Working Temperature: -22° F(-30°C) to 212°F (100°C).
|
|
Liquid Tight Strain Relief Cord Connectors
Strain Relief Cord Connectors
Standard Strain Relief
Cord Connector
Strain Relief Cord Connectors Nuts
|
|
|
Loom Clamps - Vinyl Coated Steel
| | Typical applications include holding hydraulic hoses, wire harnesses
and cables
| | | | The mounting hole is 17/64" for 1/4" screw or bolt
|
Loom Clamps - Carbon Steel
| | Carbon steel plated loom clamps with zinc/gold chromate
| | | | Mounting hole is .406" for 3/8" stud
| | | | Width of steel is 5/8"
| | | | Removable EPDM jacket
|
|
Loom Clamps - Vinyl Coated Steel
Loom Clamps - Carbon Steel
|
|
|
Braided Sleeving
| | This braided self-wrap sleeving is soft and quiet in high vibration
environments.
| | | | It's more flexible than slit loom and more durable than spiral
wrap.
| | | | This sleeving simply self-closes around a group of wires.
| | | | The semi-rigid braiding is stretchy and springy, allowing wires
to be pulled out or new ones inserted repeatedly if necessary.
| | | | It's flexible enough to bend to a tight radius without distorting
and splitting open.
| | | | Unlike rigid slit loom, it will not impair or affect the flexibility
of the wires.
| | | | It retains its shape and rigidity from -75°C to 125°C
(-103°F to 257°F)
|
Colored Expandable Loom
| | This polyethylene terephthale is an ideal cover for outboard motor
cables, marine hoses, trailer chains and harness assemblies
| | | | Expands up to 2 times the I.D. size.
| | | | Operating temperature of -75°C to 125°C(-103°F to
257°F).
| | | | Use the expandable tubing hot knife (item no. 990070) to cut expandable
sleeving
| | | | Available in red, yellow and blue.
|
Fiberglass, High Temp Loom
| | Heavy-weight fiberglass is coated with resin material to either
deflect or encapsulate temperatures up to 649°C (1,200°F)
| | | | Reistant to abrasion, gasoline and other engine chemicals.
| | | | Cuts easily with a pair of scissors without faying ends.
| | | | Maintains tight cohesion under heavy vibration, mechanical stress
and varied temperature variations.
| | | | Available in black or silver.
|
Expandable Sleeving
| | This polyethylene terephthale is an ideal cover for outboard motor
cables, marine hoses, trailer chains and harness assemblies
| | | | UL file no. E107055; CSA file no. LR 66-145-1
| | | | Use the expandable tubing hot knife (item no. 990070) to cut expandable
sleeving
|
|
|
|
|
Chrome Slit Loom
| | This chrome loom is made from 100% nylon with a secondary chroming
process that resists flaking.
| | | | Choose this loom for complete wire abrasion protection.
| | | | Contains a slit for easy insertion of wires over a long run.
| | | | Temperature rating: -40° C to 76° C (-40° F to 170°
F).
|
Spiral Cut Loom
| | A spiral cut in this loom allows wires to stay in place, yet also
be pulled out if needed
| | | | Low density polyethylene material
| | | | Temperature rating: -35°C to 73°C (-30°F to 165°
F).
|
Slit Loom
| | Polyethylene slit loom has become one of the most popular conduits
for holding groups of wires in position and protecting the wires against abrasion or crushing
| | | | Contains a slit for easy insertion of wires over a long run; when
bent or twisted the slit basically remains closed
| | | | All loom weighing more than 100 lbs can be shipped LTL FREIGHT
ONLY; all other loom can be shipped via UPS
| | | | Temperature range: -40° to 200° F, -40° to 93°
C.
| | | | Quality control throughout its extrusion allows uniform thickness
for the entire run length
|
|
|
|
|
Loom Insertion Tools
| | These loom insertions tools provide an easier way to feed corrigated
slit loom onto a bundle of wires.
| | | | Perfect for repetitive applications.
|
Accessory Clips
| | Use slit loom accessories to aid in routing wires
| | | | Allows user to branch a portion of wires or to secure a section
of wires to a stationary object
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Weld
5937 Ethan Drive
Burlington, KY 41005
859-586-4069
Proweld@myway.com
|
|
|
|
